About Inchgowermachinery

Cast Croplifter
The Inchgower Cast Croplifter for harvesting down, wind blown cereal crops such as wheat and oats; also for field pea and other ground hugging crops.

The croplifter is mounted on the knife guard using the knife guard bolt and point. The lifter body pivots up and down 120mm following the ground’s surface.

cast croplifter
improves harvest times
wind blown crop

Croplifters in Action

Watch how the cast croplifter improves harvest times on a wind blown crop

Inchgower cast croplifters have been marketed by Bruce Adams of Inchgower Machinery for nearly 35 years. The lifters are quite robust and don’t bend back or break off and end up inside the harvesting machine as do the lighter pressed metal lifters that are available. A very important feature of the lifters is their ability to follow the ground contour because the lifter body can pivot up and down through 120mm.  The lifters should be run with the tips just clearing the ground surface to avoid excessive tip wear.

cast croplifter
improves harvest times
wind blown crop

Recommended spacing of the lifters is 300mm or one per foot across the harvester front.